Automotive door seals play a crucial role in keeping your vehicle's interior protected from external elements such as water, dirt, and noise. Over time, these seals can deteriorate due to exposure to the elements, leading to potential leaks and reduced effectiveness. Applying silicone oil to automotive door seals can help protect and prolong their lifespan. Here's a step-by-step guide on how to effectively protect your automotive door seals using silicone oil:

1. Gather the necessary tools and materials:

   • EKO 1000 cSt Silicone Oil
   • Clean cloth or sponge
   • Water and mild soap solution (if necessary)
   • Optional: Plastic or rubber gloves

2. Prepare the door seals:

   • Ensure that the vehicle is parked in a well-ventilated area and the doors are fully accessible.
   • Open the doors and inspect the door seals for any visible dirt, grime, or debris. If present, clean the seals using a water and mild soap solution, and then dry them thoroughly before proceeding.

3. Apply silicone oil:

   • Put on plastic or rubber gloves (if desired) to protect your hands during the application process.
   • Apply a small amount of silicone oil onto a clean cloth or sponge. Alternatively, you can use a silicone oil spray for easier application.
   • Start at one end of the door seal and work your way along its length. Gently rub the silicone oil onto the seal, ensuring full coverage. Pay extra attention to any areas that appear cracked, dried out, or weathered.

4. Work the silicone oil into the door seal:

   • Once the silicone oil is applied, use a clean cloth or sponge to work the oil into the door seal. Apply gentle pressure and make circular motions to help the oil penetrate the surface of the seal.
   • Continue working along the entire length of the seal until the silicone oil is evenly distributed.

5. Wipe off excess silicone oil:

   • After applying and working in the silicone oil, use a clean cloth to wipe off any excess oil from the surface of the door seal. This step helps prevent the oil from attracting dirt and debris, keeping the seals clean and maintaining a neat appearance.

6. Repeat the process for all door seals:

   • Apply silicone oil to all the door seals of your vehicle, following the same steps outlined above.
   • Be sure to cover all the door seals thoroughly, including those on the front doors, rear doors, and trunk or tailgate.

7. Allow the silicone oil to dry:

   • After treating all the door seals, allow the silicone oil to dry naturally. This usually takes a few minutes or as per the manufacturer's instructions.
   • Avoid closing the doors immediately after applying the silicone oil to prevent any transfer of oil onto the interior surfaces.

8. Regular maintenance:

   • Establish a regular maintenance schedule for your vehicle's door seals. Depending on weather conditions and usage, it is recommended to reapply silicone oil every few months or as needed.
   • Regularly inspect the door seals for any signs of wear, damage, or drying out. If you notice any issues, address them promptly to maintain the effectiveness of the seals.

By following this guide and regularly treating your automotive door seals with silicone oil, you can help protect them from weathering, cracking, and premature deterioration. Silicone oil provides a protective barrier that helps maintain the flexibility and integrity of the seals, ensuring optimal performance and reducing the risk of leaks and discomfort from external elements.