Regular lubrication of your garage door is essential for smooth and efficient operation. By far, one of the best lubricants to use for garage doors is pure silicone oil due to its excellent lubricating properties and long-lasting performance. Here is a step-by-step guide to help you properly lubricate your garage door using EKO's eco-friendly silicone oil:

Gather the necessary tools and materials:

• - EKO 350 eco-friendly pure silicone oil (100 cSt silicone oil also recommended)
• - Clean cloth or rag
• - Step ladder (if needed)
• - Safety gloves and goggles (optional but recommended)

Prepare the area:

• - Ensure that the garage door is fully closed and disconnected from the automatic opener to prevent accidental movement.
• - Remove any obstructions or debris from the tracks and other moving parts of the door.

Inspect the garage door:

• Examine the different components of the garage door, including the hinges, rollers, springs, and tracks, for signs of wear, damage, or rust. Replace any worn or damaged parts before proceeding with lubrication.

Apply silicone oil to the hinges:

• - Start by applying a small amount of silicone oil to each hinge pivot point. Use the nozzle or applicator provided with the lubricant to target the specific areas.
• - Move the door up and down a few times to distribute the silicone oil evenly across the hinges.

Lubricate the rollers:

• - Apply silicone oil to each roller, focusing on the bearings and shaft. Apply the lubricant to the inside and outside of the rollers for optimal coverage.
• - Roll the door up and down several times to ensure the silicone oil is evenly distributed and reaches all parts of the rollers.

Lubricate the tracks:

• - Apply a thin layer of silicone oil along the length of the tracks on both sides. Use a clean cloth or rag to spread the lubricant and ensure even coverage.
• - Slide the door up and down a few times to help the silicone oil work its way into the track and reduce friction.

Lubricate other moving parts:

• - If your garage door has torsion springs, apply a light coating of silicone oil to the springs. Be cautious and follow safety guidelines when dealing with springs as they are under tension.
• - Check other moving parts such as pulleys, cables, and pivot points, and apply silicone oil as needed.

Wipe off excess lubricant:

• After applying the silicone oil to the garage door, use a clean cloth or rag to wipe off any excess lubricant. This will prevent dripping and ensure a clean appearance.

Test the door:

• Reconnect the garage door to the automatic opener and test its operation. The lubrication should result in smoother and quieter movement.

Regular maintenance:

• Schedule regular maintenance to keep your garage door in optimal condition. Depending on usage and environmental factors, lubricate the door with silicone oil every six months or as recommended by the manufacturer.

By following this guide, you can effectively lubricate your garage door using silicone oil, promoting smoother operation and extending the lifespan of the door's components. Remember to consult your garage door manufacturer's instructions and safety guidelines for any specific lubrication recommendations or precautions.